Datamax E-Class Mark II Programmer's Manual page 91

DPAC Version 1 WIFI Configuration Parameters – Identifier 'DV1'
The 'DV1' WIFI sub-group contains the configuration parameters that are specific to
the DPAC Version 1 WIFI radio module used by Datamax-O'Neil. The 'Item-Value'
pairs within the 'DV1' sub-group of the 'WIFI' sub-group are defined by the following
table:
Item
Number
1 Network Type
2 WIFI Security Type
3 WIFI Authentication
Type
4 Static Radio IP
Address
5 Static Radio Subnet
Mask
Class Series 2 Programmer's Manual
Extended System-Level Command Functions
Name Available
to User
(Y/N)
Y
Y
Y
Y
Y
Value Type
Decimal Value that represents a Valid
Network Type for the DPAC Version 1
module.
AD-HOC = 0
Infrastructure = 1
Decimal Value that represents the DPAC
Version 1 Security Codes supported.
Security Disabled = 0
WEP, 64 Bit Key = 1
WEP, 128 Bit Key = 2
WPA-PSK = 3
WPA CISCO LEAP = 4
TKIP+40Bit WEP using EAP (LEAP) = 5
TKIP+128Bit WEP using EAP (LEAP) = 6
TKIP+40Bit WEP using WPA-PSK = 7
TKIP+128Bit WEP using WPA-PSK = 8
Decimal Value that represents the DPAC
Version 1 Authentication Types
supported (Auto, Open, Shared Key).
Automatic = 0
Open = 1
Shared Key = 2
String Static IP Address for the DPAC
Version 1 radio module in dotted
decimal notation.
String Static Subnet Mask for the DPAC
Version 1 radio module in dotted
decimal notation.
Description
79