Delete File From Module - Datamax E-Class Mark II Programmer's Manual

STX x

Delete File from Module

This command removes a specific file from the specified module. The file name is
removed from the module directory and thus the file cannot be accessed. The actual
storage space occupied by the file is not released. To reclaim deleted file storage space
use <STX>z to pack the module.
Syntax:
Where:
Sample:
34
System-Level Command Functions
<STX>xmtnn...n<CR>
- Module designator; see Appendix K.
m
- The file type identification code:
t
= Image file
G
= Label format file
L
= Downloaded bitmapped font file
F
= Downloaded scalable font file
S
= Configuration file
C
= Language file
X
= Plug-in file
N
= Miscellaneous file type
M
= Unknown type – must use extension if
u
applicable
- The file to delete, where:
nn...n
• Font (bitmapped), three character font identifier;
• Font (scalable), two character font identifier;
• Graphic name, up to sixteen alphanumeric
characters; or,
Label format name, up to sixteen alphanumeric
•
characters.
<STX>xDS50<CR>
The sample above deletes a downloaded scalable font with ID 50
from Module D.
Class Series 2 Programmer's Manual