Enable Feedback Characters; Stx B; Get Printer Time And Date Information - Datamax E-Class Mark II Programmer's Manual

STX a

Enable Feedback Characters

This command enables the feedback ASCII hex characters to be returned from the
printer following specific events after each completed batch of labels when using serial
communications. The default value is "OFF".
Syntax:
Printer response:
Where:

STX B

Get Printer Time and Date Information

This command instructs the printer to retrieve its internal time and date information.
Syntax:
Sample:
Response format:
Where:
Response sample:
18
System-Level Command Functions
<STX>a
Event dependent. (Also see Appendix D for error codes.)
Event
Invalid character
Label printed
End of batch
<STX>B
<STX>B
wmmddyyyyhhMMjjj<CR>
1 digit for day of week; 1 = Monday
w
2 digits for month
mm
2 digits for day
dd
4 digits for year
yyyy
2 digits for hour in 24 hour format
hh
2 digits for minutes
MM
3 digits for Julian date / constant*
jjj
* See <STX>A for details and restrictions.
1020319960855034<CR>
Return Characters
0x07 ( BEL )
0x1E ( RS )
0x1F ( US )
Class Series 2 Programmer's Manual