DataBar Expanded Length 1
282
Length 1 is the minimum label length if in variable length mode, or the
first fixed length if in fixed length mode (see
. Length includes the barcode's check and data characters.
Control)
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code,
You'll need to cover any unused bar codes on this and the facing
page to ensure that the scanner reads only the bar code you intend
to scan.
3. Scan the appropriate digits from the keypad in
resent the desired label length. The selectable range for this option is
01 to 74. Pad all single digit numbers with a leading zero to yield a
two-digit entry (01-74).
4. Complete the programming sequence by scanning the SWITCH
bar code.
SET DataBar Expanded LENGTH 1
SET DataBar Expanded LENGTH 1
®
Magellan
2200VS/2200VS and 2300HS/2300HS
DataBar Expanded Length
below.
that rep-
Appendix C