Standard 2 Of 5 Length 1 - Datalogic Magellan 2200VS Reference Manual

Standard 2 of 5 Length 1

Product Reference Guide
Length 1 is the minimum label length if in variable length mode, or the
first fixed length if in fixed length mode (see
. Length includes the barcode's check and data characters.
trol)
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code,
You'll need to cover any unused bar codes on this and the facing
page to ensure that the scanner reads only the bar code you intend
to scan.
3. Scan the appropriate digits from the keypad in
resent the desired label length. The selectable range for this option is
01 to 50. Pad all single digit numbers with a leading zero to yield a
two-digit entry (01-50).
4. Complete the programming sequence by scanning the SWITCH
bar code.
SET STANDARD 2 OF 5 LENGTH 1
Standard 2 of 5 (Std 2 of 5) Enable
Standard 2 of 5 Length Con-
SET STANDARD 2 OF 5 LENGTH 1
below.
that rep-
Appendix C
333