Msi/Plessey Check Character Transmission - Datalogic Magellan 2200VS Reference Manual

MSI/Plessey Check Character Transmission

NOTE
Product Reference Guide
Enables/disables transmission of optional MSI/Plessey check characters.
This feature applies only when
Calculation is enabled.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
MSI/PLESSEY CHECK CHARACTER TRANSMISSION = DISABLE
MSI/PLESSEY CHECK CHARACTER TRANSMISSION = ENABLE
MSI/Plessey Enable
MSI/Plessey Check Character
367