Upc-A Number System Character Transmission - Datalogic Magellan 2200VS Reference Manual

Hide thumbs Also See for Magellan 2200VS:

Table of Contents

UPC-A Number System Character Transmission

Enables/disables transmission of a UPC-A number system character.

This feature MUST be enabled for IBM interfaces for proper function.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan either the enable or disable bar code below. You'll need to cover

any unused bar codes on this and the facing page to ensure that the

scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

UPC-A NUMBER SYSTEM CHARACTER TRANSMISSION = DISABLE

UPC-A NUMBER SYSTEM CHARACTER TRANSMISSION = ENABLE

2200VS/2200VS and 2300HS/2300HS

Show Quick Links

Table of Contents

Magellan 2300hs