Code 93 Length 2 - Datalogic Magellan 2200VS Reference Manual

Code 93 Length 2

Product Reference Guide
Length 2 is the maximum label length if in variable length mode, or the
second fixed length if in fixed length mode (see
Length includes the barcode's check and data characters.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code,
cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the keypad in
resent the desired label length. A setting of 00 will ignore this length
(only one fixed length), otherwise, the selectable range for this
option is 01 to 50. Pad all single digit numbers with a leading zero
to yield a two-digit entry (01-50).
4. Complete the programming sequence by scanning the SWITCH
bar code.
SET CODE 93 LENGTH 2
SET CODE 93 LENGTH 2
Code 93 Enable
Code 93 Length Control)
below. You'll need to
that rep-
Appendix C
359
.