Datalogic Magellan 2200VS Reference Manual page 98

CAUTION
NOTE
88
USB-OEM Interface Selection
Remember to cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to scan.
Great care should be taken to select the correct interface type, since
you can cause damage to the scanner and/or POS terminal by attempt-
ing to change to an incompatible interface. ALWAYS make interface
selections with the host cable DISCONNECTED.
Single cable installations require connection at the POS Terminal (host)
port.
INTERFACE TYPE = USB-OEM
®
Magellan 2200VS/2200VS and 2300HS/2300HS