Epson Runsense SF-810 User Manual page 5

SF-810 User Manual
Settings
Other features
Introduction
Allows you to change the settings for the device.
❏ Communicates with external devices (Communication function)
"Smart Phone" on page 96
U
❏ Inverts the screen's display (Invert function)
"System Settings" on page 98
U
❏ Adjusts the screen's contrast (Adjust contrast function)
"System Settings" on page 98
U
❏ Turns on the light automatically when the screen changes (Auto Light function)
"System Settings" on page 98
U
❏ Sets an alarm (Alarm function)
"System Settings" on page 98
U
❏ Turns off operation tones (Operation Tones function)
"System Settings" on page 98
U
❏ Resets configuration information in the device's memory (Initialize function)
"System Settings" on page 98
U
❏ You can measure pitch and stride using the built-in stride sensor.
"Educating Your Pulse and Stride Sensor" on page 34
U
❏ You can skip GPS positioning if it is taking too long.
"Skipping GPS positioning" on page 31
U
❏ You can take measurements without performing GPS positioning.
"Indoor mode" on page 31
U
❏ You can monitor, analyse, compare and share your recorded data using the
dedicated Web application "RUNSENSE View".
"Data Management Using the Web Application (RUNSENSE View)" on
U
page 65
5