Recording Laps Automatically (At Lap Function) - Epson Runsense SF-810 User Manual

SF-810 User Manual
Recording Laps
Automatically (AT Lap
Function)
When a time or distance set in advance is reached, laps
are recorded automatically.
Set the lap time or distance. You can set five times or
distances. However, only one setting can be used while
measuring.
Note:
By using the PC application (Run Connect), you can setup
AT Lap from your computer.
When setting up from your computer, you can set your
own time or distance to divide laps.
"Setting the AT Lap Function" on page 82
U
Operation buttons
A
Display the measurement screen.
Press C on the time screen.
GPS positioning starts, and the measurement
screen is displayed once positioning is complete.
Measure
"Specifying a GPS (GPS Positioning)" on
U
page 30
B
Displays the Measure set. menu.
Hold down B on the measurement screen.
C
Select AT Lap.
Use C/D to select, and then press A.
D
Select an empty setting.
Use C/D to select, and then press A.
When this is already set, select one of SETTING
01 to 05.
E
Select whether to set distance or time
as the length of the lap.
Use C/D to select, and then press A.
F
Set the time or distance.
Use C/D to set, and then press A.
56