Epson Runsense SF-810 User Manual page 64

SF-810 User Manual
D
Select Delete.
Use C/D to select, and then press A.
E
Select Yes.
Use C/D to select, and then press A.
F
After deleting, display the recall
screen.
Note:
To continue deleting history data, repeat steps 2 to
5.
G
Finish deleting history data.
Hold down A.
The time screen is displayed.
c
Important:
Even if you delete unnecessary measurement
data, the memory on the device is not cleared. If
the free space on the device is full, saved data is
removed in order starting with the oldest data. Be
aware that data will be deleted when the memory
is full. Initialize the device to clear the memory.
"System Settings" on page 98
U
To clear all of the history, you need to Initialize the
device. When initialising, all setting information for
User Settings, Sys. Settings, and Measure set. is also
Initialized along with the history information.
"System Settings" on page 98
U
Checking Measurement Data (Recall Function)
64