Starting Run Connect And Displaying The Settings Screen - Epson Runsense SF-810 User Manual

SF-810 User Manual
Setting Measurements Using the PC Application (Run Connect)
Starting Run Connect and Displaying the Settings
Screen
A
Connect the cradle to the computer on which Run Connect is installed with a USB
cable.
B
Place the device into the cradle.
Check that the contact points on the device are pointing up and match the contact marks on the cradle.
After placing the device into the bottom of the cradle, push carefully on the top of the device until it is fixed in
place.
c
Important:
Make sure the device is placed in the correct direction; otherwise, the device or the cradle could be
damaged.
Run Connect starts.
80