Changing The Measurement Screen - Epson Runsense SF-810 User Manual

SF-810 User Manual
Changing the measurement
screen
The setting method varies depending on the screen
pattern. See the explanations for each screen pattern.
"Setting 1 Line/2 Lines/3 Lines" on page 107
U
"Setting Pace&Graph/HR&Graph" on page 108
U
"Setting Lap/Target Pace/OFF" on page 109
U
Setting 1 Line/2 Lines/3 Lines
Here we will explain how to display Calories Burnt in
Screen4 using 1 Line.
Operation buttons
A
Display the measurement screen.
Use one of the following methods to display.
❏ When performing GPS positioning:
Press C on the time screen.
❏ When skipping GPS positioning:
Press C on the time screen, and then select
Skip on the GPS positioning screen.
"Skipping GPS positioning" on
U
page 31
❏ When not performing GPS positioning
(Indoor mode):
Press C on the time screen, and then select
Indoor on the GPS positioning screen.
"Indoor mode" on page 31
U
Settings
B
Display the Measure set. menu.
Hold down B on the measurement screen.
C
Select Screen.
Use C/D to select, and then press A.
D
Select Screen4.
Use C/D to select, and then press A.
E
Select 1 Line.
Use C/D to select, and then press A.
Screen Image is displayed. HR is displayed by
default.
107