Uploading Measurement Data - Epson Runsense SF-810 User Manual

Gps sports watch
Hide thumbs Also See for Runsense SF-810:
Table of Contents

Advertisement

SF-810
User Manual
Data Management Using the Web Application (RUNSENSE View)

Uploading Measurement Data

You can upload measurement data to the Web application (RUNSENSE View).
A
Connect the cradle to the computer on which Run Connect is installed with a USB
cable.
B
Place the device into the cradle.
Check that the contact points on the device are pointing up and match the contact marks on the cradle.
After placing the device into the bottom of the cradle, push carefully on the top of the device until it is fixed in
place.
c
Important:
Make sure the device is placed in the correct direction; otherwise, the device or the cradle could be
damaged.
Start Run Connect.
71

Advertisement

Table of Contents
loading

Table of Contents