Measure Set. Table - Epson Runsense SF-810 User Manual

SF-810 User Manual

Measure set. table

Setting items
Activity Type
Mode
AT Lap
AT Pause
Settings
Value
Run (default)
Walk
Bike
Chronograph (default)
Interval
Goal
SETTING 01 to 05
OFF (default)
ON
OFF (default)
Explanation
Set when running or jogging.
Set when walking (exercising at a slow pace).
Set when performing exercises that do not require you to
swing your arms, such as riding a bike.
Set the mode to suit the measurements you want to
make.
Chronograph mode allows you to measure split times
and lap times (section measurement) simultaneously.
"Measuring Time, Distance, and Speed
U
(Chronograph Function)" on page 40
Interval mode allows you to switch the sets of hard
(sprint) or light (recovery) exercises, and repeat using the
specific distance or time set in advance.
"Setting a Time and Distance for Hard and Light
U
Workouts (Interval Function)" on page 45
Goal mode measures until the time or distance set in
advance is reached.
"Measure until the Time or Distance Set in Advance Is
U
Reached (Goal Function)" on page 52
When a time or distance set in advance is reached, this
function records laps automatically.
Set the lap time or distance.
You can set five times or distances within the following
range.
Time: 01'00" to 60'00" (in increments of 1 minute)
Distance: 0.1 to 10.0 km (in increments of 0.1 km)
"Recording Laps Automatically (AT Lap Function)"
U
on page 56
This function automatically stops measuring when you
stop running, and resumes when you continue running.
"Automatically Start/Stop Measuring (AT Pause
U
Function)" on page 58
93