Redmike Share: Charging - Lightspeed Redcat User Manual

REDMIKE SHARE: CHARGING

1. Ensure the REDMIKE share is turned OFF.
2. Make sure the cradle charger is plugged into
a wall outlet. Connect one end of the charging
cable into the jack labeled CHARGER on the
bottom of the REDMIKE Share. Plug the other
end into the charging jack on the rear of the
cradle charger.
3. The LED on the microphone will glow RED to
indicate charging.
4. Leave the REDMIKE Share plugged in
overnight (8-10 hours) to obtain a full charge.
52