Deleting Contacts; Placing Calls To Contacts - Polycom Soundpoint IP 450 User Manual

The steps for answering an incoming call when you are in another call are
different if your phone is configured for:
• A single Line Key per line
• Multiple Line Keys per line
You can ignore incoming calls by pressing the Reject soft key (for private lines)
or the Silence soft key (for shared lines) or the Do Not Disturb key. The Do Not
Disturb mode stays active when the call ends and remains active u ntil you press
the Do Not Disturb key again.
When your phone is configured with a silent ring, press the ringing Line key or
the Answer soft key to answer the call. If your handset is off-hook, the call is
routed to the handset. If your handset is on-hook, the call is routed to the speaker.
Answering When Not on Another Call
In all cases, the active call will appear on the screen showing call duration and
destination.
To answer a call using the handset:
>> Pick up the handset.
5. Edit the contact information.
6. Press the Save soft key.
7. Press to return to the idle screen.

Deleting Contacts

To delete a contact from the local contact directory:
1. Press .
2. Select Features > Contact Directory.
3. Scroll to highlight the contact.
You can also use the * key to page up and the # key to page down.
4. Press the More soft key twice, and then press the Delete soft key.
The contact is deleted from the directory.
5. Press to return to the idle screen.

Placing Calls to Contacts

To place a call to a contact in the local contact directory:
1. Press .
2. Select Features > Contact Directory
3. Scroll to highlight the contact.
You can also use the * key to page up and the # key to page down.
4. Press the Dial soft key.
To place a call to a contact in the corporate director y:
1. Press
.
2. Select Features > Corporate Directory.
3. Search for the contact.
Refer to Searching for Contacts
.
in the corporate directory on page 2-16.