Adding Contacts Manually; Placing Calls On Hold; Multiple Calls On Hold - Polycom Soundpoint IP 450 User Manual

Adding Contacts Manually

To add a contact to the local contact directory manually:
1. Press .
2. Select Features > Contact Directory.
3. Press the More soft key.
4. Press the Add soft key.
5. Enter first and/or last name of the contact from the keypad.
Use the 1/A/a soft key to select between numeric and upper/lower case
alphanumeric modes.
Use the Encoding soft key to access special characters in other languages.
6. Enter a contact number.
This is a required field and it must be unique (not already in the directory).
7. (Optional.) Change the Speed Dial Index.
It is automatically assigned to the next available index value.
Valid speed dial index values are from 1 to 9999. If you enter a speed dial index
that already, "Speed dial index already exists" appears. If you enter an invalid
value, "Speed dial index invalid" appears.
For more information, refer to Assigning Speed Dial Keys on page 3-19.
A call to your last placed call is attempted.
To redial a previously placed call, refer to

Placing Calls on Hold

During a call, press or the Hold soft key. The hold icon will display on the
line key label.
Press again or the Resume soft key to retrieve the call. The registeredline
icon appears as the line indicator.

Multiple Calls on Hold

If multiple calls are on hold on a single Line Key, use and to switchbetween the
calls, and then press the Resume soft key to retrieve the desired call.
Managing Call Lists.