Changing The Language; Changing The Background - Polycom Soundpoint IP 450 User Manual

To manage a conference call:
1. Press the Manage soft key.
The Manage Conference page appears.
2. Do one of the following:
— To add a new party, press the Add soft key.
Call another party as you would using the Confrnc soft key (outside the
conference management feature). The other parties are put onhold.
After the new party answers, press the More soft key, and then the Confrnc soft
key again to join all parties in the conference.
The Add soft key appears only if you can add more parties to the
conference call. Your system administrator determines the maximum
number of conference participants. The default number is three. For
more information, contact your system administrator.
— To mute a party, select the party, then press the Far Mute soft key.
The muted party can hear all parties, but no party can hear the mutedparty.
If you press instead of the Far Mute soft key, all other parties can hear each
other, but they cannot hear you.
Press the UnMute soft key to un-mute the party.
— To place a party on hold, select the party, and then press the Hold soft key.
The held party cannot hear any parties and no party can hear the hel d party.
5. Press the Select soft key to change to the selected ring type.
6. Press to return to the idle screen.

Changing the Language

Not supported at this time with Rage!Business Office Xchange

Changing the Background

You can change the picture or design that appears on the screen. A defaultbackground
displays when the phone starts up (shown below). For moreinformation on selections,
contact your system administrator.
To change the graphic background:
1. Press .
2. Select Settings > Basic > Preferences > Backgrounds.
3. Scroll to highlight the background you want.
4. Press the Select soft key.
5. Press to return to the idle screen.
One of the background selections is shown below.