Modes Of Operation; Setting °C/24 Hour Or °F/12 Hour Clock; Setting The Time - ORTAL Clear 40 Tunnel, Clear RS Tunnel Installation & Operation Manual

OPERATING INSTRUCTIONS

MODES OF OPERATION

▪ pressing the SET button chang-
es the mode of operation in the follow-
ing order:
→
MAN
→ → and back to
TIMER
NOTE: Manual mode can also be reached by pressing
either the
button.
▪ – Manual Mode:
MAN
– Daytime Temperature Mode
▪
TEMP
(Appliance must be in standby mode;
pilot ignited):
The room temperature is measured
and compared to the set temperature.
adjusted to achieve the Daytime Set
Temperature.
▪ – Light/Dimmer Setting Mode:
Turns light/dimmer ON and OFF and
adjusts brightness.
– Circulating Fan Setting Mode:
▪
Turns circulating fan ON and OFF and
adjusts fan speed.
N O T E : To turn OFF fan press
bars dis appear.
APPENDIX B
→ → →
TEMP
TEMP
.
MAN
(small
▪
perature Mode (Appliance must be
in standby mode; pilot ignited): The
room temperature is measured and
compared to the Nighttime Setback
T
automatically adjusted to achieve the
Nighttime Setback Temperature.
▪
TIMER
be in standby mode; pilot ignited): The
Timers P1 and P2 (Program 1, Program
2) each can be programmed to go ON
tions see Timer Programming Mode.
NOTE: The display shows the set temperature every
30 seconds.
SETTING °C/24 HOUR OR °F/12 HOUR CLOCK
▪ Press OFF and
until display changes from Fahrenheit/12
hour clock to Celsius/24 hour clock and
vice versa.

SETTING THE TIME

▪ The
a) Installing the battery or
b) Simultaneously pressing the
▪ Press
hour.
▪ Press
minute.
▪ Press OFF or simply wait to return to
manual mode.
18 / 65
FOR OEM USE ONLY
– Nighttime Setback Tem-
TEMP
– Timer Mode (Appliance must
A p p e n d i x B
-
(large