Setting The On/Off Temperatures; Setting Program Timers - ORTAL Clear 40 Tunnel, Clear RS Tunnel Installation & Operation Manual

OPERATING INSTRUCTIONS

SETTING THE ON/OFF TEMPERATURES

Setting the "DAYTIME" Temperature
DEFAULT SETTINGS:
TEMP
▪ press SET button to scroll to
TEMP
SET
▪ Press
crease
▪ Press
crease
▪ Press OFF or simply wait to complete
programming.
Setting the "NIGHTTIME SETBACK" Temperature
DEFAULT SETTINGS:
TEMP
press SET button to scroll to
▪
TEMP
TEMP
SET
▪ Press
Nighttime Setback Temperature.
APPENDIX B
(sun), 23 °C/74 °F
(sun) mode. Hold the
TEMP
Daytime Set Temperature.
Daytime Set Temperature.
(moon), " " (OFF)
(moon) mode. Hold the
▪ Press
crease
perature.
▪ Press OFF or simply wait to complete
programming.
-

SETTING PROGRAM TIMERS

Default Settings:
CE: Program 1: P1
Program 2: P2
- CSA: Program 1: P1
Program 2: P2
▪ 2 ON times can be programmed
▪ CE: The day starts at 0:00, ends at 23:50.
▪ CSA: The day starts at 12:00
▪ The ON/OFF times have to be programmed in the order
P1 ≤ P1 < P2
▪ If P1 = P1 or P2
CE: P2 23:50 and P1
CSA: P2 11:50
▪ Select
the SET button.
Setting P1 ON Time
▪ Hold the SET button until P1
▪ Set the hour by pressing the
19 / 65
FOR OEM USE ONLY
Nighttime Setback Tem-
: 6:00 P1 : 8:00
: 23:50 P2 : 23:50
: 6:00 P1 : 8:00
am
: 11:50 P2 : 11:50
pm
per day.
, ends at 11:50
am
≤ P2 .
= P2 the timer is deactivated.
0:00
and P1 12:00
am am
A p p e n d i x B
-
am
pm
.
pm
(sun) is
(large