Important Safety Information - ORTAL Clear 40 Tunnel, Clear RS Tunnel Installation & Operation Manual

IMPORTANT SAFETY INFORMATION

causing property damage, personal injury, or loss of life. The product must be installed and operated according to
all codes and local regulations.
Damper position must be in accordance with Manufacturer's Installation Instructions and all applicable Standards.
Failure to follow these Instructions and/ or Standards may cause property damage, personal injury, or loss of life.
WHAT TO DO IF YOU SMELL GAS
▪ Do not operate any appliance.
▪ Do not touch any electrical switch; do not use any phone in your building.
▪ Immediately evacuate the area and contact the gas supplier. Follow the gas supplier's instructions.
▪ If you cannot reach the gas supplier
shall conform with local codes, or in the absence of local codes, in accordance with the National Fuel Gas Code ANSI
Z223.1/NFPA 54 or the IFGC or CSA B149.1. All piping and tubing must comply with local codes and ordinances.
Use only your hand to push in or turn the gas control knobs. Never use tools. If a knob will not push in or turn by hand,
Do NOT use this control or any gas appliance if any part has been under water or in contact with water. Immediately
in contact with water.
ELECTRIC SHOCK HAZARD:
▪ Read these instructions carefully. Failure to follow them could result in property damage, personal injury, or loss
of life.
▪ This control must be electrically wired and operated in accordance with all codes and local regulations. Service
and installation must be performed by a trained, experienced service technician.
▪ Do not use the control if you suspect it may be damaged.
APPENDIX B
2 / 65
A p p e n d i x B