Programming a tour
To setup an automatic tour with your PTZ camera, select the Set tab, enter the number 1 in the
Set box (for your first tour), and click <Start Tour>. Enter a preset position number in the
Preset box and click <Add Preset>. Enter the next preset number and click <Add Preset>.
After entering your final preset number, click on <Stop Tour> (the same button location as
Start Tour, but changes its name automatically).
【Delete Preset】Will remove set points from a tour
【Clear Tour】Use this command button to delete a tour.
【Tour Scan】To start a tour that you have previously programmed. Enter the number of the
tour in the Control box, then click <Tour Scan>. To stop the tour, click <Tour Scan> once
again, or <Limit Scan> to stop the tour and return the camera to preset position number
one.
【Pattern Scan】An optional Left to Right pan control for certain models of PTZ cameras.
【PTZ Reset】An optional clear memory command for certain models of PTZ cameras.
【Auto Pan】An optional Left to Right pan control for certain models of PTZ cameras.
3.7 Alarm control
If your DVR is equipped with optional alarm trigger inputs, use this menu to quickly manage the
PTZ Control Screen
26