Camera Tab; Ptz Setup - Security Labs 960H Series User Manual

Table of Contents

Select a channel (or "All") to modify, click on the type of recording you wish to use, left click and

drag your mouse through the time segment to set the schedule, click SAVE when finished.

4.2 Camera

Use this tab to access settings for a PTZ camera, areas to block from the view of a camera,

adjust video motion detection, and sequential camera viewing.

There is no industry standard for the default settings used by a PTZ camera. The settings

shown above are the most popular and are the default settings for a Security Labs PTZ

camera. The task here is to match the settings in the DVR to the settings used by your PTZ

camera. If you are connecting more than one PTZ camera, remember to assign each camera

a unique address (Ex: 1, 2, or 3). The DVR uses this address to communicate with the camera

you wish to control.

Table of Contents