Display & Camera Adjustments - Security Labs 960H Series User Manual

inputs and output for an alarm condition.
【Set Alarm】Sets the channel in a "standby mode" that will activate a recording when an alarm
trigger is detected.
【Clear Alarm】Deactivates the "standby mode".
【Alarm Output】Select the channel(s) you want to activate the alarm output relay contact.
【All】Allows you to quickly select all channels in the corresponding row.
TIP:
The Alarm Control is for how the alarm should work. Be sure to configure the alarm inputs
and schedule during the initial setup for when
3.8 Display & Camera Adjustments
(1)
Video / Monitor
The Video adjustment screen gives you control over the signal being recorded. Each channel
(camera) can be adjusted by clicking on the screen (high-light green border around channel),
select <User-Define> from the drop list, then adjust (in order from left to right): Brightness,
Contrast, Saturation (intensity of color), Chroma (tint), and Sharpness. You may also select a
preset effect from the drop down list. The arrows to the right of the drop list take the settings
back to their default position. Controls on the Monitor tab allow you to adjust the signal that is
being fed to the Video Out (TV Output) or to the VGA/HDMI monitor outputs.
the alarm should work.
27