Network Remote Control (Optional); Network Dvr Setup; Online With Dhcp Server - Security Labs SLD 244 Owner's Manual

Four channel multiplexed

Hide thumbs Also See for SLD 244:

Table of Contents

When proceeding with the "FORMAT/ ERASE" function, the above display

will be shown.

When the password entered is correct, the screen will display the message

"PASSWORD CORRECT", "HDD FORMATED" (flashes 3 times). This

indicates hard disk format is successful.

When the password entered is incorrect, the screen will display "PASSWORD

INCORRECT" (flashes 3 times), and returns to "HARD DRIVE" selection.

9. NETWORK REMOTE CONTROL (Optional)

Before installing the Network DVR, you need to first setup an IP Address, connect it to

your local area network (router), and use IPEdit.exe to identify and test the DVR.

Note: Before using PPPoE and DDNS connection method, one must first setup an IP

Address (using IPEDIT.exe).

Your system router will serve as a DHCP. This means your router automatically assigns a

local IP address to your computer and any network peripherals, such as your DVR.

Double click or run IPEDIT.exe to find the installed Network DVR. Select the

Network DVR in the Camera List Window. The default configuration will be shown

on the right window. Update the IP status.

Table of Contents