Backup Operation; Controlling A Ptz Camera - Security Labs 960H Series User Manual

2. Starts playback after selecting time periods to view.
3. Stop button
4. Slow motion speeds of 1/2, 1/4, 1/8, and 1/30.
5. Real time playback
6. Fast forward speeds of 2X, 4X, and 8X.
7. Playback time slide control.
Allows you to drag the time indicator across the bottom of the screen to quickly pinpoint the
time period you wish to view. Time changes can be seen in the box on the right as you slide the
indicator.
8. Audio level control
9. Multi-Channel View selection
10. Display or hide play list
11. Backup menu button

3.5 Backup Operation

TIP:
If you have not already done so, connect your mouse to the bottom USB port on the back
panel of the DVR. This will allow easy access to the front panel USB port for the flash drive
backup device.
Depending on the file system on your USB flash drive, it may be best to re-boot the DVR with
the flash drive installed. Turn the power off on the DVR (facing the DVR, the power switch is
located on the top left corner of the back panel), insert the flash drive into the USB slot on the
bottom right corner of the front panel, and turn the power back on.
Access the playback control screen and select a time period just as you would to play a file
as described above, only click on the <Backup> button (11) rather than the Play button (2).
Click on the USB drive that appears in the selection screen, and then <Backup Start>.
Please wait until the backup counter is finished, and click on <Device Uninstall> before
removing the flash drive. An .avi file will automatically be placed on the flash drive with no
further conversion needed to play the recording on most computers.
3.6 Controlling a Pan / Tilt / Zoom Camera (PTZ)
24