Pppoe & 3G (Dial Up) Setup - Security Labs 960H Series User Manual

The WAN is also often called the 'Internet'. Each device (computers, cell phones, etc) on your
LAN has a unique IP address.
【Subnet Mask】 Server subnet mask. All devices on your LAN need to have the same subnet
mask in order to communicate with each other.
【Default Gateway】 Server gateway. This is typically the same IP address as the router on
your system and allows the DVR to communicate to the WAN or internet.
【DNS Server】 DNS server addresses. The "Domain Name Server" is an address that
contains a list that enables a device to translate domain names into numbers. People use
words to navigate the internet; machines use numbers.
【Server Port】 Data port, initial socket is 7777. This is the port that allows the DVR to send
data and video.
【HTTP Port】"Hyper Text Transfer Protocol" Port. This is the port your computer or mobile
device browser uses to view web pages. The default port for browsers is 80. If you wanted to
connect to 192.168.1.1 on port 80, you would just type 192.168.1.1. The '80' is the default and
you don't have to enter it. If you change the DVR port to another number, like '81' you will
need to enter the port in your browser address: 192.168.1.1:81 (the port follows the IP
address with a colon in front of it). Changing the DVR port is helpful when setting up internet
or WAN remote viewing for the DVR.
【Handset Port】This is the port your mobile phone or other mobile smart device can use to
access the DVR, initial socket is 8888. This number is used in the setup screen on your mobile
device.
4.3.2 PPPoE & 3G (Dial-UP Setup)
PPPoE "Point to Point Protocol over Ethernet"
This configuration setup is for infrequently used systems that connect using a 3G network
card and a local network.
1) Automatic Dialing (Dial type PPPoE)
Select the PPPoE in the interface along with your account and password of the 3G card in
your network.
2) Manual Dialing (Dial type 3G)
35