Table of Contents
Advertisement
Chapter Three – Operation
3.1 Live View
At power up your DVR will automatically go to the live, Multi Channel view mode. To switch to a
single camera, select the Multi Channel icon on the control bar.
The channel view control will then be displayed.
Select the single view box on the top left, and click on the desired channel number to view, or
scroll through the live cameras with the forward or reverse arrows. To return to multi-view, click
on the multi view box on the top right. Click on "X" to close the control.
TIP: Colorful icons are displayed at the top of each channel's view to show the current status
of that channel.
1
Recording
Audio On (mic or camera with audio
3
must be connected to DVR
2
Motion Detected
20
Advertisement
Table of Contents
