BVM Bandit arf Assembly And Operation Instructions Manual page 41

Trim the white ABS plastic as shown to fit the perimeter of the nose gear opening.
Scuff the plastic with #320 grit and glue in place with ZAP-A-GAP.
Check the position and motion of the door then drill and screw the door hinge using #2 x 3/8" button
head screws.
BVM © 2009 K5300-Current_manual-090808.doc
Assembly & Operation Manual
Tape the front nose gear
door in position.
Apply SLO-ZAP to the hinge
location in the fuselage and
set the nylon hinge in
position to cure.
Page 38 12/2/2009