Wan Budget - Draytek Vigor 2925 Series User Manual

Monthly
User Defined
Vigor2925 Series User's Guide
out a warning message to the administrator when the quota
is running out. However, the connection charges will be
calculated continuously.
Send SMS messages to Administrator - The system will
send out SMS message to the administrator when the quota
is running out.
Some ISP might apply for the network limitation based on
the traffic limit per month. This setting is to offer a
mechanism of resetting the traffic record every month.
Billing cycle starts from ... – The period of billing cycle is
about one month. You can determine the starting day of one
month as billing cycle.
Some ISP might apply for the network limitation based on
the traffic limit per month. This setting allows the user to
define the billing cycle according to his request.
The WAN budget will be reset with an interval of billing
cycle.
User Defined – Monthly is default setting. If long period or
a short period is required, use User Defined. The period of
billing cycle is between 1 day and 60 days. You can
determine the cycle duration by specifying the days and the
hours. In addition, you can specify which day of current day
in a cycle.

Billing cycle: Specify the days to reset the traffic record.
For example, 7 means the whole cycle is 7 days; 20
means the whole cycle is 20 days. When the time is up,
the router will reset the traffic record automatically.

Current day in cycle – Specify the day in the billing
cycle as the starting point which Vigor router will reset
the traffic record. For example, 3 means the third day of
the billing cycle.
188