4
.
7
.
1
G
e
n
e
r
a
l
4
.
7
.
1
G
e
n
e
r
a
l
General Setup can determine the standard (rule-based or user-based) for the users controlled
by User Management. The mode (standard) selected here will influence the contents of the
filter rule(s) applied to every user.
Available settings are explained as follows:
Item
Mode
Display IP Address on
tracking window
Web Authentication
Landing Page
After finishing all the settings here, please click OK to save the configuration.
Vigor2925 Series User's Guide
S
e
t
u
p
S
e
t
u
p
Description
There are two modes offered here for you to choose. Each
mode will bring different filtering effect to the users
involved.
User-Based - If you choose such mode, the router will
apply the filter rules configured in User
Management>>User Profile to the users.
Rule-Based –If you choose such mode, the router will
apply the filter rules configured in Firewall>>General
Setup and Filter Rule to the users.
Choose On to display the IP address of the client on the
tracking window.
Choose the protocol for web authentication.
Type the information to be displayed on the first web page
when the LAN user accessing into Internet via such router.
268