General Setup - Draytek Vigor 2925 Series User Manual

Therefore, when WAN1 and WAN2 are not available, the router will use 3.5G for supporting
automatically. The supported 3G/4G USB Modem will be listed on DrayTek web site. Please
visit www.draytek.com for more detailed information.
Below shows the menu items for WAN.
4 . 1 . 2 G e n e r a l S e
4 . 1 . 2 G e n e r a l S e
This section will introduce some general settings of Internet and explain the connection modes
for WAN1, WAN2, WAN3 and WAN4 in details.
This router supports multiple-WAN function. It allows users to access Internet and combine
the bandwidth of the multiple WANs to speed up the transmission through the network. Each
WAN port can connect to different ISPs, Even if the ISPs use different technology to provide
telecommunication service (such as DSL, Cable modem, etc.). If any connection problem
occurred on one of the ISP connections, all the traffic will be guided and switched to the
normal communication port for proper operation. Please configure WAN1, WAN2, WAN3
and WAN4 settings.
This webpage allows you to set general setup for WAN1, WAN2, WAN3 and WAN4
respectively.
Available settings are explained as follows:
Item
Load Balance Mode
t u p
t u p
Description
This option is available for multiple-WAN for getting
enough bandwidth for each WAN port. If you know the
practical bandwidth for your WAN interface, please choose
the setting of According to Line Speed. Otherwise, please
choose Auto Weigh to let the router reach the best load
balance.
159
Vigor2925 Series User's Guide