Draytek Vigor 2925 Series User Manual page 504

Available settings are explained as follows:
Item
SysLog Access Setup
AlertLog Setup
Vigor2925 Series User's Guide
Description
Enable - Check Enable to activate function of syslog.
Syslog Save to – Check Syslog Server to save the log to
Syslog server.
USB Disk - Check USB Disk to save the log to the attached
USB storage disk.
Router Name - Display the name for such router
configured in System Maintenance>>Management.
If there is no name here, simply lick the link to access into
System Maintenance>>Management to set the router
name.
Server IP Address -The IP address of the Syslog server.
Destination Port - Assign a port for the Syslog protocol.
Mail Syslog – Check the box to recode the mail event on
Syslog.
Enable syslog message - Check the box listed on this web
page to send the corresponding message of firewall, VPN,
User Access, WAN, Router/DSL information to Syslog.
Check Enable to activate function of alert log.
AlertLog Port - Type the port number for alert log. The
default setting is 514.
492