Draytek Vigor 2925 Series User Manual page 368

Index
Name
Click each index to edit one peer digital certificate. There are three security levels of digital
signature authentication: Fill each necessary field to authenticate the remote peer. The
following explanation will guide you to fill all the necessary fields.
Available settings are explained as follows:
Item
Profile Name
Enable this account
Accept Any Peer ID
Accept Subject
Alternative Name
Accept Subject Name
After finishing all the settings here, please click OK to save the configuration.
Vigor2925 Series User's Guide
Click the number below Index to access into the setting
page of IPSec Peer Identity.
Display the profile name of that index.
Description
Type the name of the profile. The maximum length of the
name you can set is 32 characters.
Check it to enable such account profile.
Click to accept any peer regardless of its identity.
Click to check one specific field of digital signature to
accept the peer with matching value. The field can be IP
Address, Domain, or E-mail Address. The box under the
Type will appear according to the type you select and ask
you to fill in corresponding setting.
Click to check the specific fields of digital signature to
accept the peer with matching value. The field includes
Country (C), State (ST), Location (L), Organization (O),
Organization Unit (OU), Common Name (CN), and
Email (E).
356