Draytek Vigor 2925 Series User Manual page 387

General Setup
Detailed information for this dialog, see later section -
Advanced Load Balance and Backup.
Status- After choosing one of the profile listed above,
please click Enable to activate this profile. If you click
Disable, the selected or current used VPN
TRUNK-Backup/Load Balance mechanism profile will not
have any effect for VPN tunnel.
Profile Name- Type a name for VPN TRUNK profile.
Each profile can group two VPN connections set in
LAN-to-LAN. The saved VPN profiles in LAN-to-LAN
will be shown on Member1 and Member2 fields. The length
of the name is limited to 11 characters.
Member 1/Member2 - Display the selection for
LAN-to-LAN dial-out profiles (configured in VPN and
Remote Access >> LAN-to-LAN) for you to choose for
grouping under certain VPN TRUNK-VPN Backup/Load
Balance mechanism profile.

No - Index number of LAN-to-LAN dial-out profile.

Name - Profile name of LAN-to-LAN dial-out profile.

Connection Type - Connection type of LAN-to-LAN
dial-out profile.

VPN ServerIP (Private Network) - VPN Server IP
of LAN-to-LAN dial-out profiles.
Active Mode - Display available mode for you to choose.
Choose Backup or Load Balance for your router.
Add - Add and save new profile to the backup profile list.
The corresponding members (LAN-to-LAN profiles)
grouped in such new VPN TRUNK – VPN Backup
mechanism profile will be locked. The profiles in
LAN-to-LAN will be displayed in red. VPN TRUNK –
VPN Load Balance mechanism profile will be locked. The
375
Vigor2925 Series User's Guide