Available settings are explained as follows:
Item
Enable
Protocol
Source IP
Destination IP
Description
Check this box to enable this policy.
Use the drop-down menu to choose a proper protocol for
the WAN interface.
Any – Any IP can be treated as the source IP.
Src IP Start - Type the source IP start for the specified
WAN interface.
Src IP End - Type the source IP end for the specified
WAN interface. If this field is blank, it means that all the
source IPs inside the LAN will be passed through the WAN
interface.
Any – Any IP can be treated as the destination IP.
Dest IP Start- Type the destination IP start for the
specified WAN interface.
Dest IP End - Type the destination IP end for the specified
WAN interface. If this field is blank, it means that all the
225
Vigor2925 Series User's Guide