4.
Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system
status of this protocol will be shown.
5.
Now, you can enjoy surfing on the Internet.
D
H
C
P
D
H
C
P
1.
Choose WAN2 as WAN Interface and click the Next button. The following page will be
open for you to specify Internet Access Type.
2.
Click DHCP as the Internet Access type. Simply click Next to continue.
Available settings are explained as follows:
Item
Host Name
Description
Type the name of the host.
Note: The maximum length of the host name you can set is
43
Vigor2925 Series User's Guide