Draytek Vigor 2925 Series User Manual page 509

Set Community
Manager Host IP (IPv4)
Manager Host IP (IPv6)
Trap Community
Notification Host IP
(IPv4)
Notification Host IP
(IPv6)
Trap Timeout
Enable SNMPV3 Agent
USM User
Auth Algorithm
Auth Password
Privacy Algorithm
Privacy Password
Click OK to save these settings.
character. The default setting is public.
The maximum length of the text is limited to 23 characters.
Set community by typing a proper name. The default setting
is private.
The maximum length of the text is limited to 23 characters.
Set one host as the manager to execute SNMP function.
Please type in IPv4 address to specify certain host.
Set one host as the manager to execute SNMP function.
Please type in IPv6 address to specify certain host.
Set trap community by typing a proper name. The default
setting is public.
The maximum length of the text is limited to 23 characters.
Set the IPv4 address of the host that will receive the trap
community.
Set the IPv6 address of the host that will receive the trap
community.
The default setting is 10 seconds.
Check it to enable this function.
USM means user-based security mode.
Type a username which will be used for authentication. The
maximum length of the text is limited to 23 characters.
Choose one of the encryption methods listed below as the
authentication algorithm.
Type a password for authentication. The maximum length
of the text is limited to 23 characters.
Choose one of the methods listed below as the privacy
algorithm.
Type a password for privacy. The maximum length of the
text is limited to 23 characters.
497
Vigor2925 Series User's Guide