Draytek Vigor 2925 Series User Manual page 345

IP Address List
3. Click OK button to save the settings.
4. If you need to configure LAN DNS settings, click index 1 to edit the LAN DNS profile
just created. Or, you can click index 2 to use this profile as conditional DNS forwarding.
Available settings are explained as follows:
Item
Enable
Profile
Domain Name
The IP address listed here will be used for mapping with the
domain name specified above. In general, one domain name
maps with one IP address. If required, you can configure
two IP addresses mapping with the same domain name.
Add – Click it to open a dialog to type the host's IP
address.

Only responds to the DNS.... – Different LAN PCs
can share the same domain name. However, you have
to check this box to make the router identify &
respond the IP address for the DNS query coming
from different LAN PC.
Delete – Click it to remove an existed IP address on the list.
Description
Check this box to enable such profile.
Type a name for such profile.
Note: If you type a name here for conditional DNS
forwarding and click OK to save the configuration, the
name also will be applied to LAN DNS automatically.
Type the domain name for such profile.
333
Vigor2925 Series User's Guide