Top Cover - Hitachi DZ-BD7HA Service Manual

Disassembly and Reassembly > Disassembly

(3) Top Cover

1) Remove the MIC circuit board (a) into the AEL circuit board (b).
2) Remove the screw [D].
3) Remove the two screws [A].
4) Pull out the EVF unit (c) in the direction of the arrow.
5) Remove the Top cover (d) in the direction of the arrow.
Caution during disassembly and reassembly:
Insert tabs (Z) of the top cover into the front block (e), and then reassemble the top cover.
(a) MIC circuit board
(b) AEL circuit board
(c) EVF unit
(d) Top cover
(e) Front block
(f) FRT circuit board
(g) MAN circuit board
Detailed view of screw and circuit board positions
Fig. 5-3-3
5 - 5