Hitachi DZ-BD7HA Service Manual page 42

Hide thumbs Also See for DZ-BD7HA:
Table of Contents

Advertisement

Troubleshooting > Messages and Troubleshooting
Message
No disc
No more scenes.
Play List was deleted.
Play Lists over limit.
Cannot create Playlist.
Same scenes on Play List
will be deleted.
Delete scenes?
YES NO
Scene is too short.
Cannot divide.
Scene NO.xxx is too large.
Please divide this scene
before dubbing.
Scenes over limit.
Cannot add scene.
Scenes over limit.
Cannot divide scene.
Stop processing.
Cause/condition for
message to appear
Appears if no BD/DVD is loaded.
Appears when a disc that cannot be used
on the camcorder has been loaded.
Appears when the BD/DVD was not
properly attached to the turntable.
If any of the above does not apply, the
camcorder may be faulty.
Appears during user operation; all
recorded scenes have been deleted and
cleared. The specifi cations stipulate that
a play list with no scene on it cannot be
held: If all registered scenes have been
deleted, the play list will also be deleted.
Appears if an attempt is made to create
a new play list or edit play list after
the number of registered play lists
has reached the upper limit (99) that
is defi ned by the DVD video recording
format.
This message appears during user
operation, if even one play list has been
created during scene deletion. This mes-
sage does not appear when a scene is
deleted from play list.
Appears if an attempt is made to divide
an very short scene. If division of scenes
is repeated, an extremely short scene
may be generated.
Appears if the capacity of the corre-
sponding scene is greater than that of
one BD (approx. 7.5 GB)/DVD (approx.
1.4 GB).
Appears if an attempt was made to add
a new scene to the playlist in which
the number of registrable scenes had
reached the limit. [Refer to *1 page 4-11]
Appears if an attempt was made to di-
vide a scene when the number of scenes
had reached the limit, of if dividing the
scene caused the number of scenes to ex-
ceed the limit. [Refer to *1 on page 4-11.]
This message appears during operation
process. It will appear when user
interrupted any process by pressing
the stop/exit button when processing
multiple scenes, etc.
4 - 9
Troubleshooting
Load a BD/DVD
Check the type of BD/DVD, and load
a BD/DVD that can be used on this
camcorder.
Attach the BD/DVD properly.
Refer to "4-5 Trouble Diagnosis ".
Operate the camcorder after the mes-
sage disappears.
Delete unnecessary scenes before
creating a new play list or editing
play list.
Choose "YES" and designate it to
delete selected scenes.
Give up the division of scene.
Divide the scene so that the capacity
is less than that of one BD (approx.
7.5 GB)/DVD (approx. 1.4 GB).
Delete unnecessary scenes from play
list before adding a new scene to it.
Delete unnecessary scenes before
dividing a scene.
Operate the camcorder after the mes-
sage disappears.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dz-bd70a

Table of Contents