Lens Cover [Dz-Gx20Ma/Mv750Ma] - Hitachi DZ-GX20MA Service Manual

Disassembly and Reassembly > Disassembly
(3) Cushion F and Cushion R
Information:
1) Replace cushion F and cushion R only if they are damaged or deteriorate.
2) Cushions F and R are attached to the R case that is a service part.
1) Move the lock slider (c) in the direction of
the arrow to open the disc insertion block.
2) Use tweezers, etc. to remove cushions F (a)
and R (b) from the R case (d), taking care not
to scratch the R case or disc drive unit (e).
Cautions during disassembly and reassembly:
1) Make sure that there is no dust or remaining
cushioning material on the R case.
2) When replacing cushions F and R, always
use brand-new cushions.
(4) Lens Cover
[DZ-GX20MA/MV750MA]
1) Remove the screw [B].
2) Remove the lens cover (a) in the direction of
the arrow.
[DZ-GX20MA/MV780MA/MV750MA]
(a) Cushion F
(b) Cushion R
(c) Lock slider
(d) R case
(e) Disc drive unit
(f) Accessory shoe
(a) Lens cover
1) [B]
(a)
5 - 4
(f)
1)
(e)
(c)
(b)
Fig. 5-3-3
2)
Fig. 5-3-4
(d)
(a)
[B] M1.7×2.5
(Black)