Lcd Case-U, Lcd Block, Cassette Lid, Top Cover - Hitachi VM-H675LA Service Manual

2.3 LCD Case-U, LCD Block, Cassette Lid, Top Cover (Figs. 2-3-1, 2-3-2)
Cautions:
1. Dismantle and reassemble only the cassette lid and top
cover in loading stop status. After work is completed,
return the mechanism to loading stop status.
2. Be careful that the LCD screen is not damaged or
smudged. (If dirt adheres to it, use a soft cloth to wipe it
off.)
3. Handle the LCD module and backlight with extreme
care.
CASSETTE
LID
(A)
RELEASE
TWO TABS
REMOVE
TWO
SCREWS
LCD
CASE-U
TOP COVER
REMOVE
TWO
SCREWS
RELEASE
FIVE TABS
REMOVE
ONE
SCREW
Fig. 2-3-1
Advise of Top Cover Removal
Insert a flat-bladed screwdriver between the top cover and
sub chassis, and push section (B) of the plate spring in the
direction of arrow (C), to remove the top cover in the
direction of the arrow. (See Fig. 2-3-2)
Reinstallation procedure and caution:
To install the cassette lid, first engage sections (A) with the
cassette holder.
DISCONNECT
TWO
CONNECTORS
LCD BLOCK
(B)
PLATE
SPRING
FLAT-BLADED
SCREW DRIVER
(C)
REMOVE
TOP
COVER
SUB CHASSIS
TOP
COVER
Fig. 2-3-2
2 - 3