Table of Contents
Advertisement
Quick Links
3002369/03
OWNER'S GUIDE
MODEL
639
Open Decorative
Gas Fire
(G.C No. 32-032-47)
THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20)
WHEN CONVERTED USING CONVERSION KIT NO. 0591301 THIS
APPLIANCE IS FOR USE WITH PROPANE GAS (G31)
THIS APPLIANCE IS FOR USE IN THE UNITED KINGDOM (GB) AND
THE REPUBLIC OF IRELAND (IE) ONLY.
This guide is intended to help you care for your Valor gas fire. Please read thoroughly
before using and keep for future reference
We trust that this guide gives sufficient details to enable your appliance to be
operated and maintained satisfactorily. However, if further information is required,
our
Valor Technical Helpline will be pleased to help.
Please telephone 08706 061 065 (National call rates apply).
This guide to be left with the owner
© Valor Heating
Advertisement
Table of Contents
Related Manuals for Valor 639
Summary of Contents for Valor 639
- Page 1 THIS APPLIANCE IS FOR USE IN THE UNITED KINGDOM (GB) AND THE REPUBLIC OF IRELAND (IE) ONLY. This guide is intended to help you care for your Valor gas fire. Please read thoroughly before using and keep for future reference We trust that this guide gives sufficient details to enable your appliance to be operated and maintained satisfactorily.
- Page 2 BS EN ISO 9001 quality system accepted by the British Standards Institute. The Highest Standards Valor is a member of the Society of British Gas Industries which works to ensure high standards of safety, quality and performance. Careful Installation Valor is a CORGI registered company.
-
Page 3: Table Of Contents
OWNER’S GUIDE LIST OF CONTENTS SAFETY ..........................4 APPLIANCE DIMENSIONS....................6 GAS CONSUMPTION ......................7 OPERATING THE FIRE....................7 The Oxysafe flame sensing & flue blockage safety system..........7 To light the fire.........................8 Lighting with a taper ......................9 CLEANING ........................10 Metal parts........................10 Coals and Pebbles...................... -
Page 4: Safety
OWNER’S GUIDE SAFETY IF YOU SMELL GAS DON’T SMOKE EXTINGUISH ALL NAKED FLAMES DON’T TURN ELECTRICAL SWITCHES ON OR OFF TURN OFF THE GAS SUPPLY AT THE METER OPEN DOORS AND WINDOWS TO GET RID OF THE GAS IMMEDIATELY CALL THE GAS EMERGENCY SERVICE - SEE YOUR LOCAL TELEPHONE DIRECTORY •... - Page 5 OWNER’S GUIDE • provide a suitable guard that complies with BS 6539 or 6778 for the protection of young children, the elderly and the infirm. Such a guard is also recommended for the protection of pet animals. (Although this fire conforms to all the applicable standards, it is a heating appliance and certain parts of its surface will become hot.).
-
Page 6: Appliance Dimensions
OWNER’S GUIDE APPLIANCE DIMENSIONS Firefront Dimension ‘X’ (mm) Dimension ‘Y’ (mm) Azure Quattro Majestic Figure 1. Appliance dimensions. Page 6... -
Page 7: Gas Consumption
Has a maximum natural gas input of 6.85kW (Gross) Has a minimum natural gas input of 2.3kW (Gross) Model 639 when converted using kit number 0591301 Has a maximum propane gas input of 6.7kW (Gross) Has a minimum propane gas input of 4.0kW (Gross) -
Page 8: To Light The Fire
OWNER’S GUIDE To light the fire Depress the control knob and rotate it anticlockwise to the pilot ignition position. A ‘click’ will be heard as the integral piezo operates. A flame should appear at the pilot. Keep the control knob depressed and hold the pilot ignition position for five seconds. -
Page 9: Lighting With A Taper
OWNER’S GUIDE • If the flames go out while setting the control, repeat the full lighting procedure. • If the flames repeatedly go out have the fire serviced. • Please note. When first turned on the flames will appear predominantly blue. The coals / Pebbles will take time to warm up. -
Page 10: Cleaning
OWNER’S GUIDE CLEANING Turn the fire off and allow it to cool completely before attempting any cleaning. Note that the fire will retain heat for some time after it has been turned off. If large pieces of debris are found anywhere in the fireplace, have the chimney inspected before further use. -
Page 11: Fuel Bed Refitting - Coal
Only the fuel bed parts supplied with this appliance or authorised Valor replacements must be used. Never add extra coals above the number stated in these instructions. Figure 4. Ceramic Base Location Place the ceramic base coal in the burner compartment. - Page 12 OWNER’S GUIDE Install the 12 loose coals as follows. The underside of each coal is marked with a letter ‘A’ to ‘L’ and an arrow. The coals should be positioned so that the arrows always point towards the back of the firebox. When located into position the stem of each arrow should be at 90°...
- Page 13 OWNER’S GUIDE Hold coal ‘D’ upright with the arrow pointing to the top. Locate coal ‘D’ as shown in figure 9. Hold coal ‘E’ upright with the arrow pointing to Figure 9. Second row “Coal D” the top. Locate coal ‘E’...
- Page 14 OWNER’S GUIDE Locate coals ‘G’ to ‘K’ so that they are firmly seated in the valleys in the coal base. Hold coal ‘G’ upright with the arrow pointing to the Figure 12. Third row “Coal G” top. Locate coal ‘G’ as shown in figure 12.
- Page 15 OWNER’S GUIDE Hold coal ‘J’ upright with the arrow pointing to the top. Locate coal ‘J’ as shown in figure 15. Hold coal ‘K’ upright with the arrow pointing to the top. Locate coal ‘K’ as shown in figure 16 Figure 15.
-
Page 16: Fuel Bed Refitiing - Pebbles
Only the fuel bed parts supplied with this appliance or authorised Valor replacements must be used. Never add extra Pebbles above the number stated in these instructions. Place the ceramic pebble base in the burner compartment. - Page 17 OWNER’S GUIDE The position of the pebbles is important. Do not alter the position of the pebbles from that shown in this section of the owner’s guide. Install the 16 loose pebbles as follows. The underside of each pebble is marked with a number ‘1’...
- Page 18 OWNER’S GUIDE Locate pebbles ‘3’ to ‘7’ so that they are firmly seated in the valleys in the pebble base and front pebbles. Hold pebble ‘3’ upright with the arrow pointing to the top. Locate Pebble Figure 22. Second row “Pebble 3” ‘3’...
- Page 19 OWNER’S GUIDE Hold pebble ‘7’ upright with the arrow pointing to the top. Locate pebble ‘7’ as shown in figure 26. This will complete the second row of Figure 26. Second row “Pebble 7” loose pebbles. Locate pebbles ‘8’ to ‘12’ so that they are firmly seated in the valleys in the...
- Page 20 OWNER’S GUIDE Hold pebble ‘10’ upright with the arrow pointing to the top. Locate pebble ‘10’ as shown in figure 29. Hold pebble ‘11’ upright with the Figure 29. Third row “Pebble 10” arrow pointing to the top. Locate pebble ‘11’ as shown in figure 30 Hold pebble ‘12’...
- Page 21 OWNER’S GUIDE Hold pebble ‘13’ upright with the arrow pointing to the top. Locate pebble ‘13’ as shown in figure 32. Leave a 5mm gap between pebble 13 and the pebble to its right. Figure 32. Fourth row “Pebble 13” Hold pebble ‘14’...
-
Page 22: Regular Maintenance
OWNER’S GUIDE Decorative firefront. Place the decorative firefront on the hearth and centralise to the appliance. ‘Quattro’ firefront only • Locate the firefront as in figure 36.The hooks should fit into the slots on the burner tray. Figure 36. Hanging the firefront •... -
Page 23: Servicing
OWNER’S GUIDE Servicing Servicing can be carried out either by a Valor Service engineer or a CORGI registered installer. If you require your fire to be serviced, please contact Valor Service on 08706 090 081 and quote the following details. These can be found on the data plate tied to the underside of the burner. -
Page 24: Useful Numbers
VALOR SPARES 08706 000 454 CALLERS IN THE REPUBLIC OF IRELAND Call 0044 08706 061 064 Valor Heating, Erdington, Birmingham B24 9QP Because our policy is one of constant development and improvement, details may vary slightly from those given in this publication.