Valor HORIZON 613CCB Installation Instructions Manual

Contemporary cast front black
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

613CCB Contemporary Cast Front Black
CSA approved for use with Valor Models 534 Heaters ONLY
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall be
installed for the protection of children and other at-risk
individuals.
The 613CCB Contemporary Cast Front Black may be fi tted to any Valor
models 534 heaters, either at the time the heater is installed or retrofi tted
afterwards (provided existing wall and hearth fi nish allow – see diagrams).
The installation of the Contemporary Cast Front has specifi c mantle
clearances and framing dimensions described below, which differ from those
listed for other trims used with 534 heaters. Refer to the installation manual
packed with the heater for all other aspects of installation.
35-3/4" (908 mm)
*NOTE: Bottom of plate is flush with
bottom of heater. Install bottom of
heater flush with finished hearth.
4001086-08
© Copyright Miles Industries Ltd., 2015
H
ORIZON
Installation Instructions
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
1/2" (13 mm)
Max. Clearance
bot. of door to
bot. of plate
IN STA LLER
Leave this manual
with the appliance.
CO N SUM ER
Retain this manual
for future reference.
Note: This kit must be installed
or serviced by a qualifi ed
installer, service agency or gas
supplier. These instructions are
to be used in conjunction with
the main installation instructions
for the above listed heater
model.
WARNING: If the information
in these instructions is not
followed exactly, a fi re or
explosion may result causing
property damage, personal
injury or loss of life.
Casting Tolerances
Due to the nature of cast iron,
dimensional consistency may vary
from one unit to the next and some
variation in surface fi nish and
fl atness is to be expected. We have
done our best to control and make
allowance for this; however some
variation is inevitable.
NOTE: This kit MUST be installed
at fi nish hearth height.

Advertisement

Table of Contents
loading

Summary of Contents for Valor HORIZON 613CCB

  • Page 1 These instructions are The 613CCB Contemporary Cast Front Black may be fi tted to any Valor to be used in conjunction with models 534 heaters, either at the time the heater is installed or retrofi tted the main installation instructions afterwards (provided existing wall and hearth fi...
  • Page 2: Kit Content

    NOTE: Wall finish must be flush or slightly in front of this frame on heater! Heat Duct 534 / 535 Heater Backing Plate Assembly Heat Duct Inner Casting Backing Plate Assembly Inner Casting Barrier Screen Barrier Screen Ashpan Fret Kit Content Ashpan Fret Overview...
  • Page 3: Installation

    Framing • Approved for combustible fl oor under and in front of the appliance. • Combustible wall fi nish may contact the sides of the heater’s black frame. • Non-combustible wall fi nish may be required above the heater, between the header and the backing plate—see Wall Finish Detail &...
  • Page 4 4. Fix the hanging brackets to the back side of 7. Drop cast iron fret into place by sliding the bolts into the Inner Casting as shown. Note the left/right the slots of the fret brackets on the inner casting. orientation of the brackets.
  • Page 5: Repair Parts List

    Because our policy is one of constant development and improvement, details may vary slightly from those given in this publication. Designed and Manufactured by / for Miles Industries Ltd. 190 – 2255 Dollarton Highway, North Vancouver, B.C., CANADA V7H 3B1 Tel. 604-984-3496 Fax 604-984-0246 www.valorfi replaces.com...
  • Page 6: Directives D'installation

    à risques. Note : Ce kit doit être installé Le kit 613CCB peut être installé avec les foyers Valor 534 au moment de et entretenu par un installateur l’installation du foyer ou à une date ultérieure (à condition que la fi nition qualifi...
  • Page 7: Contenu Du Kit

    NOTE : La finition du mur doit être égale ou dépasser Déflecteur légèrement (en saillie) le cadre noir du foyer de chaleur Foyer Plaque 534 / 535 de soutien Déflecteur Cadre de chaleur intérieur Plaque de soutien Cadre intérieur Grille de protection Grille de protection...
  • Page 8 Encastrement • Matériau combustible permis sous et devant le foyer. • Aucun dégagement requis entre la fi nition du mur combustible et les côtés de l’encadrement noir du foyer. La fi nition peut toucher les côtés de l’encadrement. • Une fi nition incombustible peut être exigée immédiatement au-dessus du foyer, entre le linteau et la plaque de soutien du kit—voir le schéma Détails de la fi...
  • Page 9 5. Il y a 4 petits onglets de métal à l’intérieur de 9. Adjustez le défl ecteur de chaleur en le tirant jusqu’à l’encadrement noir du foyer (2 par côté). Ces ce qu’il soit aligné au rebord de la plaque de onglets sont utilisés pour accrocher certaines soutien.
  • Page 10: Entretien

    Entretien AVERTISSEMENT AVERTISSEMENT AVERTISSEMENT AVERTISSEMENT NE TOUCHEZ PAS LE NE TOUCHEZ PAS LE PARE-ÉTINCELLES PARE-ÉTINCELLES OU POUR RAISONS DE SÉCURITÉ, assurez-vous POUR RAISONS DE SÉCURITÉ, assurez-vous LA FENÊTRE LORSQU’ILS SONT CHAUDS! LA FENÊTRE LORSQU’ILS SONT CHAUDS! que le pare-étincelles soit réinstallé sur le foyer que le pare-étincelles soit réinstallé...

Table of Contents