Lancia THESIS CONNECT Owner's Manual page 97

"Points of interest"
This function is used to obtain a file
containing the location and informa-
tion on points of general interest such
as, for example, restaurants, muse-
ums, stations etc., divided by cate-
gory. Under the option "Service" you
will find also Lancia Dealerships.
Service selection criteria are the fol-
lowing (fig. 76):
– Traffic (public sport airport, air-
port, rest area, etc.)
– Recreation (shopping, golf course,
etc.)
fig. 76
96
– Service (petrol stations, Lancia
Dealerships etc.)
– Other (library, convention centre,
etc.).
To select the category, the type and
the point of interest, turn and press
the right knob 21 (fig. 1). Press "Go
back" to return to the previous screen.
IMPORTANT The Points of interest
file is conditioned by the updating
level of navigation CD ROM data.
"Destination memory"
This option displays the screen with
the list of memorised navigation des-
tinations of up to a maximum of 20
destinations. The same screen also
contains the options "Guidance",
"Create", "Edit", "Delete", "Delete
all" and "Go back" that can be acti-
vated with the multifunction keys.
Select a destination using the right
knob 21 (fig. 1); the display will show
the data relevant to the destination se-
lected. Press "Guidance" to start the
route calculation.
Select "Create" to store new desti-
nations following the procedures de-
scribed previously.
Press "Edit" to edit a stored desti-
nation.
To delete a destination from the des-
tination memory, select it and then
press "Delete".
To delete all stored destinations,
press "Delete all".
Press "Go back" to return to the
previous screen.