Lancia THESIS CONNECT Owner's Manual page 138

"DATA TO DESTINATION"
FUNCTION
This function shows on the left-hand
side of the display the distance to des-
tination, the estimated time of arrival
and the time elapsed from the start of
the journey. Distance is expressed in
km; when the destination is near the
value is expressed in metres (m).
If the navigation system is not in-
stalled or if off, when selecting this
function the relevant warning mes-
sage will be displayed.
DATA RESET
To reset the on-board computer
data, press the "Reset" multifunction
key on the main TRIP screen. After
pressing the key a new screen with the
following options (fig. 93) will be dis-
played:
– Reset since hh:mm
– Reset all data.
Press "Go back" to return to the
main on-board computer screen.
fig. 93
The left-hand side of the display
shows the data that can be reset:
– Travel time
– Distance covered
– Average consumption (Avg. cons.)
– Average speed.
Select and confirm "Reset since
hh:mm" to reset partial data. Select
and confirm "Reset all data" to clear
all the on-board computer data. Be-
fore resetting the system will ask for
confirmation: press "Yes" to reset oth-
erwise press "No".
137