Lancia THESIS CONNECT Owner's Manual page 9

Hide thumbs Also See for THESIS CONNECT:
Table of Contents

Advertisement

GENERAL INFORMATION
The CONNECT system controls
and provides information for the fol-
lowing systems and functions:
– Sound system with radio, cassette
player, CD-ROM/Audio CD player,
CD-changer and voice commands
– colour TV set with voice com-
mands
– GSM cell phone with voice com-
mands
– Navigation system with voice
commands
– On-board computer
– Targasys assistance services and
functions.
The interface is the multifunction
information display for all the inte-
grated components.
8
MULTIFUNCTION
INFORMATION DISPLAY
The system uses a graphic 7", 16:9
LCD 256-colour TFT display with a
resolution of 480 x 234 pixels
(153.4 x 86.4 mm active matrix).
The display brightness can be
changed depending on the environ-
ment conditions and the driver's
requirements, storing two settings,
day and night, which are can be set
manually by the user or automatical-
ly when turning on/off of the car
external lights.
TURNING THE SYSTEM ON/OFF
AND STAND-BY FEATURE
The system may be in one of the
following conditions:
– off, all functions disabled
– normal status, all functions are
active or can be enabled
– stand-by, functions partially
active and screen darkened.
Turning the system on
The system is turned on automati-
cally turning the ignition key or the
ignition switch knob to MAR. When
it is turned on the system is in the
condition that was active before the
last time it was turned off (excluding
the stand-by status that is not
restored).
When the ignition key is at STOP
or removed or the ignition switch
knob is at STOP, the system is
turned on pressing the left knob or
the SOS key for the call for assis-
tance (to use the phone it is neces-
sary to enter the SIM card and the
PIN code, exception made for the
"emergency 112" call).

Advertisement

Table of Contents
loading

Table of Contents